Aritech 2X Series User Manual

Chapter 3: Configuration and commissioning
2X Series Installation Manual 53
4. Press F4 (Enter), and then press F1 (Back).
5. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
To create a new operator user account:
1. Select Password setup from the Main menu, and then select Manage users.
2. Press F3 (New) to create a new account.
3. Enter a username and a password for the new account.
Usernames help to identify user session activity in the event log.
4. Press F4 (Enter), and then press F1 (Back).
5. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
Installer level operation and configuration
The installer level is password-protected and is reserved for authorized users
installing and configuring the control panel and the fire system. The default
password for the default installer user is 4444.
The Main menu
The installer level Main menu is shown below.
Figure 22: The installer level Main menu
Panel configuration
Use the Panel setup menu to access the control panel configuration options
shown below.
Table 20: Control panel configuration
Option
Description
ID configuration
Configures the control panel Firenet ID (for the fire network) and
description. The description is displayed on the LCD when the
control panel is in standby.

Aritech 2X Series Specifications

General

Brand	Aritech
Model	2X Series
Category	Fire Alarms
Language	English