• Unloading Pressure 1 is highlighted in grey. Use the Scroll keys (3) to highlight the setting to be
modified and push the Enter key (1). Following screen appears:
The upper and lower limit of the setting is shown in grey, the actual setting is shown in black. Use the
↑ or ↓ key of the Scroll keys to modify the settings as required and push the Enter key to accept.
If necessary, change the other settings as required in the same way as described above.
6.14 Inputs menu
Control panel
Instruction book
150 2920 1815 04
To Next Page
Loading...
Need help?
General
