3.17 Modify settings menu
Function
To modify a number of programmable settings:
• Regulation settings (see section Modifying regulation settings).
• Protection settings (see section Modifying protection settings).
• Service settings (see section Modifying service settings).
3.18 Modifying regulation settings
Control panel
Function
To modify a number of regulation settings. Consult the menu flow in section Control programs.
Procedure
Starting from the Main screen (see Main screen menu):
• Press key “Menu” (F1).
• Press key (1) until “Modify settings” is shown.
• Activate the menu by pressing key “Select” (F2).
• The first item (“Regulation”) is shown. Press key “Select” (F2) and use keys (1) to scroll to the
setting to be modified.
• For each parameter, the modifying procedure is similar to the example below.
The regulator will not accept new values beyond the limitations.
It is possible to check the limitations which are valid for the parameter to be modified by
selecting “Limits”.
Instruction book
60 2920 1815 04
To Next Page
Loading...
Need help?
General
