Atlas Copco ZR 110 User Manual

Shut-down reset
• Switch off the voltage and remedy the trouble.
• Switch on the voltage and start the compressor. It may be necessary to reset the display after
remedying the fault: press the key “Reset”; the message “All protection functions are OK” will appear
whereupon the compressor can be restarted. Press the keys “Menu” and “MainScreen” to return to the
main screen.
3.13 Measured data menu
Control panel
Function
To call up the actually measured data. Consult the menu flow in section Control programs. If the output of
the sensor is linked to a protection function, the related shut-down and warning settings are also shown.
3.14 Hours menu
Control panel
Function
To call up:
Instruction book
56 2920 1815 04

Atlas Copco ZR 110 Specifications

General

Brand	Atlas Copco
Model	ZR 110
Category	Air Compressor
Language	English