Barco DP2K-12C Installation Manual

11. Maintenance
11.2 Clean the dust filter on the bottom side
Only for a DP2K-15C and a DP2K-20C projector.
Remove the dust filter
1. Remove the side cover, see "Rem oval of the side cover", page 70.
2. Release the dus t filter by pushing the handle a little bit downwards.
Image 11-3
Bottom dust filter
3. Pull out the dust filter.
Clean the dust filter
1. Remove most contamination with a vacuum cleaner in an other room or o utside.
2. Blow remaining du st away with compressed air in an other room or outside.
Mount the dust filter
1. Insert the dust filter with the locking lip facing up.
2. Push the handle a little downwards and insert the filter completely. Release the handle so that it jumps in to its lock.
11.3 Clean the dust filter on the top side
Remove the dust filter
1. Remove the side cover, see "Rem oval of the side cover", page 70.
2. Pull out the dust filter.
R5905050 DP2K C-SERIES 10/07/2012
81

Barco DP2K-12C Specifications

General

Brand	Barco
Model	DP2K-12C
Category	Projector
Language	English