Barco DP2K-23B User Manual

R5905753 /17 DPxK-19B/23B/P106
7.5 Removing a HDD from the ICMP(-X)
In case the ICMP(-X) has to be returned to factory (e.g. for repair) the non defective HDDs should
be removed and kept.
How to remove a HDD ?
1. Switch off the projector.
2. Moving the latch towards the left.
Image 7–12
3. Push the unlock button to open the handle.
Image 7–13
4. Pull the HDD out of its slot.
Image 7–14
To install an HDD, see the following procedure: “Installing a HDD into the ICMP(-X)”, page 104.
ICMP(-X)

Barco DP2K-23B Specifications

General

Contrast ratio (typical)	2000:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
AC input voltage	200 - 240 V
Lamp power	4000 W

Weight and Dimensions

Depth	754 mm
Width	604 mm
Height	1129 mm
Weight	133000 g