Barco DP2K-23B User Manual

R5905753 /17 DPxK-19B/23B/P152
11.1 Remove and clean the front dust filter
WARNING: Take care: the metal filters of the projector are fragile. Clean with care!
How to remove
1. Remove the input cover.
2. Slide out the filter frame.
Image 11–1 Front dust filter
Clean the dust filter
1. Remove most contamination gently with a vacuum cleaner in an other room or outside.
2. Blow remaining dust away with clean (without oil/lubricant) compressed air in an other room or outside. Do
not hold compressor nozzle too close to the projector filters, as this may also cause damage.
These dust filters are fragile. Clean them gently!
Mount the dust filter
1. Insert the dust filter with the “up” indication to the top of the projector.
Maintenance

Barco DP2K-23B Specifications

General

Contrast ratio (typical)	2000:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
AC input voltage	200 - 240 V
Lamp power	4000 W

Weight and Dimensions

Depth	754 mm
Width	604 mm
Height	1129 mm
Weight	133000 g