Barco DP2K-23B User Manual

151R5905753 /17 DPxK-19B/23B/P
11.1 Remove and clean the front dust filter .......................................................................................... 152
11.2 Remove and clean both bottom dust filters ................................................................................... 153
11.3 Cleaning the lens........................................................................................................................ 154
11.4 Cleaning the exterior of the projector ............................................................................................ 154
11.5 Check cooling liquid level ............................................................................................................ 155
11.6 Cooling liquid refill ...................................................................................................................... 155
11.7 Authorization to clear security warning on the projector.................................................................. 156
About this chapter
This chapter describes how to remove the dust filters
The air filters should be cleaned monthly under normal environment conditions. Equipment in very
dusty or otherwise contaminated areas may require more frequent maintenance.
If the air filters are not regularly cleaned, the air flow inside the projector could be disrupted and
cause overheating. Overheating may lead to the projector shutting down during operation.
Maintenance 11

Barco DP2K-23B Specifications

General

Contrast ratio (typical)	2000:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
AC input voltage	200 - 240 V
Lamp power	4000 W

Weight and Dimensions

Depth	754 mm
Width	604 mm
Height	1129 mm
Weight	133000 g