40
7217395.01 - en
INSTRUCTIONS PERTAINING TO THE INSTALLER
18. INFORMATION DISPLAY
18.2 OPERATION INFORMATION
To display some useful information during the boiler operation proceed as follows:
•
Press the
( )
button for at least 6 seconds until the display shows “A00” (…“A07”) alternating with the respective
value (e.g. gure
9);
To correct light the boiler, proceed as follows:
• Provide power supply to the boiler.
When the gas boiler is power supplì, the display shows the following information:
1. all symbols alight;
2. manufacture information;
3. manufacture information;
4. manufacture information;
5. Type of boiler and gas used (eg. ).
The displayed letters mean the following:
= natural boiler chamber = sealed boiler chamber
= natural gas METANE = LPG gas
6. Hydraulic system;
7. Software version (two numbers x.x);
• open the gas cock;
• press the button, for at least two seconds, to set the operating boiler mode (see section 3.2).
18.1 FIRST DISPLAYED INFORMATION
Figure 9
5 seconds
1102_1703
To Next Page
Loading...
Need help?
General