46
7217395.01 - en
INSTRUCTIONS PERTAINING TO THE INSTALLER
25. ELECTRICAL CONNECTION TO REMOTE CONTROL DEVICE
(SUPPLIED AS AN ACCESSORY)
The remote control device is not a
standard boiler component as it is su pplied as
an accessory. Open the elec- tronic board and
connect the cable (supplied together with the
two-pin ter- minal board) to connector CN7 on the
electronic boiler board. Connect the ter- minals of
the remote control device to the two-pin terminal
board (gure 12).
Figure 12
0610_1302 / CG_1856
CN 7
To Next Page
Loading...
Need help?
General