SETTING UP AND USING PC FAX (FOR WINDOWS
®
ONLY)
15 - 2
BHL-FB-MFC-5100C-FM5.5
MFC Remote Setup
The MFC Remote Setup application allows you to quickly set up your MFC by
taking advantage of the ease and speed of programming on your PC. When you
access this application, the settings on your MFC will be downloaded
automatically to your PC and displayed on your computer screen. If you change
the settings, you can upload them directly to the MFC.
OK
This starts the process of uploading the data to the MFC and exiting the remote
setup program. If an error message is displayed enter the correct data again,
then click OK.
Cancel
This exits the remote setup application without uploading the data to the MFC.
Apply
This uploads the data to the MFC, but does not exit the remote setup application.
Print
This command prints the selected items on the MFC. You can not print the data
until it is uploaded to the MFC. Click Apply to upload the new data to the MFC
and click Print.
Export
This command saves the current configuration settings to a file.
Import
This command reads the settings from a file.
You can check the Ink Status in the Maintenance menu.
To Next Page
Loading...
Need help?
General
