6 - 6
SETUP SEND
BHL-FB-MFC-5100C-FM5.5
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Enter the fax number.
3
Press Black Fax Start. The MFC scans the original and the LCD shows the
job number (#XXX) of the fax and how much memory is available. Then the
MFC starts dialing. You can immediately repeat Steps 1 to 3 for the next fax.
Real Time Transmission
When you are sending a fax, the MFC will scan originals into memory before
sending. Then, as soon as the phone line is free, the MFC will start dialing and
sending the fax. If memory becomes full, the MFC will send the document in
real time (even if REAL TIME TX is set to OFF).
Sometimes you may want to send an important document immediately, without
waiting for memory transmission. You can set REAL TIME TX to ON.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Press Menu/Set, 2, 2, 5.
3
To change the default setting, press to
select ON (or OFF), and then press Menu/Set.
Go to Step 5—OR—For the next fax transmission only, press
to select
NEXT FAX ONLY, and then press Menu/Set.
4
For the next fax only, press to select ON (or OFF),
and then press Menu/Set.
5
Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings, and
then go to Step 6.
6
Enter fax number, and then press Black Fax Start.
Note
If you get a OUT OF MEMORY message while scanning the first page of a
fax, press Stop/Exit to cancel scanning. If you get a OUT OF MEMORY
message while scanning a subsequent page, you can press Black Fax Start to
transmit the pages scanned so far, or press Stop/Exit to cancel the operation.
Note
Your machine normally operates in Dual Access mode. However, to send a
color fax, you must override Dual Access and use Real Time Transmission.
The number of pages you can scan into memory varies with the data they
contain.
If you are sending a color Fax, the MFC will send it in real time even if
REAL TIME TX is set to OFF.
5.REAL TIME TX
or
or
or
To Next Page
Loading...
Need help?
General
