4 - 4
INITIAL SETUP
BHL-FB-MFC-5100C-FM5.5
Setting the Ring Volume
1
Press Menu/Set, 1, 5, 1.
2
Press select (OFF, LOW, or
HIGH), and then press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your MFC is idle. You can turn the ring
OFF or you can select a ring volume level.
Press to adjust the volume level. With each key press, the MFC rings so
you can hear the active setting as the LCD shows it. Each key press changes the
volume. The new setting will remain until you change it again.
If you do not enter a fax number, no additional information can be entered.
NOTICE
The Telephone Consumer Protection Act of 1991 makes it unlawful
for any person to use a computer or electronic device to send any
message via a telephone fax machine unless such messages clearly
contain, in a margin at the top or bottom of each transmitted page,
or on the first page of the transmission, the date and time it is sent
and an identification of the business or other entity or other
individual sending the message and the telephone number of the
sending machines or such business, other entity or individual.
In order to program this information into your fax machine,
complete the steps described on page 4-2.
1.RING
or
or
To Next Page
Loading...
Need help?
General
