5 - 5
SETUP RECEIVE
BHL-FB-MFC-5100C-FM5.5
Polling
Polling is the process of retrieving faxes from another fax machine. You can
use your MFC to “poll” other machines, or you can have someone poll your
MFC.
All parties involved in polling need to set up their fax machines to accommodate
polling. When someone polls your MFC to receive a fax, they pay for the call;
if you poll someone’s fax machine to receive a fax, you pay for the call.
Setting Up Polling Receive
Polling Receive is when you call another fax machine to receive a fax from it.
1
Press Menu/Set, 2, 1, 5.
2
Press to select POLLING RX: ON,
(or POLLING RX: OFF), and then press Menu/Set.
3
Enter the fax number you are polling.
4
Press Black Fax Start.
The LCD shows DIALING.
Setting Up Sequential Polling Receive
Your MFC can request documents from several fax units in a single operation.
Afterward, a Sequential Polling Report will be printed.
1
Press Menu/Set, 2, 1, 5.
2
Press to select POLLING RX: ON,
and then press Menu/Set.
3
Specify the destination fax machines you wish to poll using, Speed Dial, a
Group or the dial pad. You must press Menu/Set between each location.
4
Press Black Fax Start.
Your MFC will poll each number or group number in turn for a document.
Some fax machines do not respond to the polling function.
5.POLLING RX
or
5.POLLING RX
or
To Next Page
Loading...
Need help?
General
