6 - 2
SETUP SEND
BHL-FB-MFC-5100C-FM5.5
1
Unfold the document tray
extension.
2
Unfold the document
stopper.
3
Fan the pages and stagger
them at a 30 degree angle.
Insert the pages face up, top
edge first in the ADF until
you feel them touch the
feed roller.
4
Adjust the paper guides to
fit the width of your original.
Setting the Special Media Lever
You can use the special media lever to select the Regular position ( ) or
Special position. ( )
To feed special types of originals (such as thin paper, thick paper, coated paper
or glossy paper), move the special media lever to the Special position ( ). It
will allow the original to feed through the ADF without slipping or jamming.
If the original “double-feeds,” try again by inserting a single sheet of original
in the ADF or use Scanner glass.
Document
Stopper
Document
tray extension
Document
Stopper
30°
Originals are
Face Up
in the ADF
Regular Position
Special Position
Special Media Lever
To Next Page
Loading...
Need help?
General
