Canon Elura 100 User Manual

Step 1: Preparing the Power Supply
The camcorder can be powered by a battery pack or be connected to a household power
source. Charge the battery pack before use.
BATTERY RELEASE
button
1. Turn the switch to _.
2. Open the LCD panel.
3. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the
battery pack.
• Slide
in the connector end of the battery
in the direction of the arrow and press it
gently until it clicks.
To remove the battery pack:
1. Open the LCD panel.
2. Hold down the BATTERY
RELEASE button and pull out the
battery from the ridge
on its
bottom part.
16
1. Connect the power cord to the
adapter.
2. Plug the power cord into a power
outlet.
3. Open the front terminal cover and
connect the power adapter to the
camcorder's
DC IN terminal.
The CHARGE indicator starts flashing.
The indicator will stay
on when the
charging is completed.
To remove the power adapter:
1. Disconnect the power adapter
from the camcorder.
2. Unplug the power cord from the
power outlet.
3. Disconnect the power cord from the adapter.
CHARGE indicator

Canon Elura 100 Specifications

General

Brand	Canon
Model	Elura 100
Category	Camcorder
Language	English