o Set it to [OFF] when you wish to record a still image as soon as you press the PHOTO
button.
o When set to [OFF], no focusing frame appears.
o The setting cannot be turned off when the mode switch is set to
_.
o
In
the
II
Fireworks recording program the setting is automatically turned off.
REVIEW: Sets how long a still image will be displayed after recording.
o
You
can erase (OJ 83) or protect (OJ 84) the image when you press the FUNG. button
while you are reviewing the image, or when you press the FUNG. button right after
recording.
o [REVIEW] cannot be selected when
Q!)
(continuous shooting),
~
(high-speed
continuous shooting) or
~
(auto exposure bracketing) is selected.
LI
CARD OPERATIONS
PRINT ORO.
NO,YES
0
103
ALL ERASE
TRANS.ORO.
NO, YES
0
109
ALL ERASE
ERASE ALL
NO, YES
0
83
IMAGES
INITIALIZE NO, YES
0
85
... PROTEGT
1
0
84
... PRINT ORDER
1
0
102
... TRANSFER ORDER
1
0
109
1 After opening the menu from the index screen
!Ii1VCR SETUP
ON, OFF
NORMAL
TV,
WIDE
TV
93
42
66
REC MODE: You can choose between SP (standard play) and LP (long play). LP extends
the tape usage by 1.5 times.
o Tapes recorded
in
LP
mode cannot be used for audio dubbing.
o Depending
on
the nature and usage condition
of
the tape, picture and sound recorded
in
LP mode may be distorted. We recommend using the SP mode for important
recordings.
o If you record
in
both SP and LP modes on the same tape, the playback picture may
become distorted and the time code may not be written correctly.
o If you play back a tape that has been recorded
in
LP
mode with another digital device
on this camcorder, or vice versa, picture and sound may become distorted.
To Next Page
Loading...
Need help?
General
