Connect to a household power source
to
use the camcorder without worrying about the
battery power.
You
can keep the battery pack attached; the battery power will not
be
consumed.
1.
Turn the
ID§il
switch to
_.
2.
Connect the power cord to the
power adapter.
3.
Plug the power cord into a power
outlet.
4.
Open the front terminal cover and
connect the power adapter to the
camcorder's DC
IN
terminal.
o Turn off the camcorder before connecting or disconnecting the power adapter.
o
Do
not connect any products that are not expressly recommended to the
camcorder's
DC
IN
terminal or to the power adapter.
o
You
may hear some noise from the power adapter during use. This
is
not a
malfunction.
o
Do
not disconnect and reconnect the power cord while charging a battery pack.
Charging may stop. The battery pack may not be charged correctly even if the
CHARGE indicator
is
continuously on. The battery pack may also not be
charged correctly when a power outage occurs during charging. Remove the
battery pack and attach it back
to
the camcorder.
o When the power adapter or battery pack
is
defective, the CHARGE indicator
flashes rapidly (at about 2 flashes/second) and the charging stops.
o The CHARGE indicator informs you about the charge status.
0-50%: Flashes once every second
More than 50%: Flashes twice every second
100
%
:
Continuously
on
-
17
To Next Page
Loading...
Need help?
General
