48
Adjusting
the
Exposure
Manually
Adjust the exposure when a backlit subject becomes underexposed, or overexposed due
to bright light. Exposure cannot be adjusted
in
the mFireworks recording program.
Available only
in
the
(CAMERA>·I:Q2].)
and
(CAMERA·Od)
modes.
1. Set
the
mode
switch
to
(fJ.
2.
If
the
joystick
guide
does
not
appear
on
screen,
press
(~)
to
display
it.
3.
Push
the
joystick
(.)
towards
[EXP]
to
enter
the
exposure
lock
mode.
• [EXP]
on
the joystick guide will
be
displayed
in
light
blue and the exposure adjustment indicator and the neutral value
"±O"
appear
on
the
screen.
• When you operate the zoom during exposure lock, the brightness
of
the image may
change.
During exposure lock:
4.
Adjust
(
.....
~
)
the
brightness
of
the
image
as necessary.
To
return to automatic exposure, push the joystick
(A)
towards [EXP] once more. The
exposure adjustment indicator will disappear and [EXP] will turn white again.
5.
Push
the
joystick
(T)
towards
[BACK]
to
save
the
exposure
setting.
• When you operate the zoom during exposure lock, the brightness of the image may
change.
• The adjustment range depends
on
the brightness at the time you locked the
exposure.
• The manual exposure setting will reset to auto exposure when you turn the
camcorder off or change the recording program.
To Next Page
Loading...
Need help?
General
