DISPLAYS: Shows the displays
on
the screen during playback.
a When set to [OFF<PLAYBK>]:
- Displays, except for the data code, disappear (however, the displays during the
magnification
of
the playback image and the activation
of
the digital effects, as well as
the FUNC. menu will still appear).
- Tape operation displays appear for approximately 2 seconds.
- Displays also disappear from the connected
TV,
except for some warning messages.
6SEC. DATE: The camcorder displays the date and time for 6 seconds when you begin
playback, or to indicate that date or time zone has changed.
a The 6-second auto date appears even if [DISPLAYS]
is
set to [OFF<PLAYBK>].
LEVEL
MARKER: A horizontal guide line will appear at the center
of
the screen.
You
can
better frame the picture better by referring to the level marker.
DEMO MODE: The demonstration mode displays the camcorder's main features. It starts
automatically when you leave the camcorder turned
on
without loading a recording media
for more than 5 minutes using the power adapter.
a
To
cancel the demo mode once it has begun, press any button, turn off the camcorder
or load a recording media.
t~
SYSTEM SETUP
WL. REMOTE ON,
OFF(((~
BEEP HIGH VOLUME, LOW VOLUME, OFF
START-UP IMG ON, OFF
POWER SAVE ON, OFF
FILE NOS. RESET, CONTINUOUS
000
0
o 0 0 0
000
0
o 0
000
68
WL. REMOTE: Sets the camcorder to be operated with the wireless controller.
BEEP: A beep sounds upon operations such as turning on the camcorder, during self-
timer countdown or warnings such as condensation.
START-UP IMG: Sets whether the Canon logo will be displayed or not when you turn on
the camcorder.
POWER SAVE: When powered by a battery pack, the camcorder shuts off to save power
if left without any operation for 5 minutes. Approximately 30 seconds before the
camcorder shuts off the
message"
ill
AUTO POWER OFF" will appear.
FILE NOS.: Select the file numbering method upon inserting a new memory card.
a Images are automatically assigned file numbers from 0101 to 9900, and stored
in
folders containing up to 100 images. Folders are numbered from
101
to 998.
[RESET]: The file number starts at 101-0101. If the memory card already contains
images files, the consecutive file number will be assigned.
To Next Page
Loading...
Need help?
General
