44
Label Description
H Shift Press ◄ or ► to move the narrowed projected image horizontally. The
function is only available when the image is narrowed.
V Shift Press ◄ or ► to move the narrowed projected image vertically. The function
is only available when the image is narrowed.
Reset Press ENTER to set to the default value.
CONTROL Menu
Label Description
Standby Mode Press ◄ or ► to select a standby mode. The options are Standard, ECO
and Network. Refer to the “Note” on page 50 for details.
Auto Power Off Press ◄ or ► to enable or disable turning off the projector when no input
signal is received within 15 minutes.
Direct Power On Press ◄ or ► to enable or disable turning on the projector when connect to
an AC power.
Network Press ENTER to enter the Network menu. See “Network Menu” on page
45.
RS232 Press ENTER to enter the RS232 menu. See “RS232 Menu” on page 50.
Startup Logo Press ◄ or ► to enable or disable the Startup Logo.
Trigger Press ◄ or ► to enable or disable turning on the screen when the projector
is powered on.
Auto Search Press ◄ or ► to enable or disable auto search function.
Dynamic Black* Press ◄ or ► to enable or disable dynamic black function
3D Press ENTER to enter the 3D menu. See “3D Menu” on page 54.
Note:
Before adjusting the 3D setting, ensure the input signal is connected.
* Optimizes the contrast depending on the brightness of each scene by adjusting lamp output
automatically based on the brightness data from the input source.
To Next Page
Loading...
Need help?
General
