To Next Page

To Previous Page

For simplicity and ease of operation, the projector provides diverse networking and remote management

features.

The LAN/RJ45 function of the projector through a network, such as remotely manage: Power On/Off,

Brightness and Contrast settings. Also, projector status information, such as: Video-Source, etc.

(Ethernet)

The projector can be controlled by a PC (Laptop) or other external device with connecting to the

projector’s LAN/RJ45 port.

Wired LAN Terminal Functionalies

Remote control and monitoring of a projector from a PC (or Laptop) via wired LAN is also possible.

Compatibility with Crestron / AMX (Device Discovery) / Extron control boxes enables not only collective

projector management on a network but also management from a control panel on a PC (or Laptop)

browser screen.

■ Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.

■ Extron is a registered trademark of Extron Electronics, Inc. of the United States.

■ AMX is a registered trademark of AMX LLC of the United States.

Note:

There is a limitation of power on/off control sequence in Network mode. It must take around 8~9 sec

after executing the power on command, regardless over the keypad, remote or IP.

Supported External Devices

This projector is supported by the specied commands of the Crestron Electronics controller and related

software (ex, RoomView

http://www.crestron.com/

This projector is supported by AMX (Device Discovery).

http://www.amx.com/

This projector is compliant to support Extron device(s) for reference.

http://www.extron.com/

Canon LX-MU700 User Manual

Questions and Answers: