Canon Pro9500 Mark II Series User Manual

A
dvanced Guide
>
A
ppendix
>
Sharing the Printer on a Network
> Settings on Client PC
Settings on Client PC
A
fter setting up the print server system, set up the client system.
The procedure for setting up the client systems is as follows:
In Windows Vista
1.
Install the printer driver on the client systems
To install the driver, load the Setup CD-ROM that comes with the printer, and select Custom Install.
For details on connection instructions, refer to the "Install the Software" in the manual: Getting
Started.
Note
During the installation, a screen prompting you to turn the printer on appears. Click Manual
Selection and then select an appropriate port to complete your installation.
2.
Start the wizard
Select the Start menu -> Network -> Add a printer.
The Add Printer window appears.
3.
Add a printer
Select Add a network, wireless or Bluetooth printer, and click the icon for the printer that you have
configured on the print server system to be shared, and then click Next.
Note
If the icon for the printer is not displayed, check that the printer is actually connected to the print
server.
It may take some time for the icon for the printer to appear.
4.
Complete the setup
Take the appropriate action as described on the screen and then click Finish.
The icon for the shared printer will be created in the Printers window.
This completes the setup on the client systems. You can now share the printer in the network.
In Windows XP/Windows 2000
1.
Install the printer driver on the client systems
To install the driver, load the Setup CD-ROM that comes with the printer, and select Custom Install.
For details on connection instructions, refer to the "Install the Software" in the manual: Getting
Started.
Note
During the installation, a screen prompting you to turn the printer on appears. Click Manual
Selection and then select an appropriate port to complete your installation.
2.
Start the wizard
In Windows XP, select the Start menu -> Control Panel -> Printers and Other Hardware ->
Printers and Faxes -> Add a printer.
In Windows 2000, select the Start menu -> Settings -> Printers -> Add a printer.
When Welcome to the Add Printer Wizard screen appears, click Next.
Page 464 of 541 pagesSettings on Client PC

Canon Pro9500 Mark II Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 2400 dpi
Number of Ink Cartridges	10
Borderless Printing	Yes
Connectivity	USB 2.0
Ink Type	Dye-based
Ink Palette	Cyan, Magenta, Yellow, Photo Cyan, Photo Magenta, Red, Green, Black, Matte Black
Media Sizes Supported	4x6, 5x7, 8x10, Letter, Legal, 13x19
Paper Handling	Auto Sheet Feeder
Operating System Compatibility	Windows, Mac
Weight	32.0 lbs (14.5 kg)