Playback
148
1
Appears for MXF clips only, when [£ OLED/VF Setup] > [Display Metadata] > [Camera Data] is set to [On].
2
Appears when [£ OLED/VF Setup] > [Display Metadata] > [Date/Time] is set to [On]. For MP4 clips, only the date of
recording appears.
3
MXF clips only.
4
For MXF clips recorded using slow & fast motion mode, the shooting frame rate and playback frame rate will both be displayed.
Playback Controls
When you play back a clip, operate the buttons on the
camcorder, the joystick and joystick guide or the supplied
wireless controller. Refer to the following table.
1 Remaining battery charge (A 51)
2 Joystick guide (A 148)
3 Shutter speed
1
(A 58)
4Aperture value
1
(A 65)
5Gain
1
(A 62)
6 Recording date and time
2
7 Playback operation
8 Relay recording
3
9 Currently selected recording media (A 41)
10 $ mark/% mark
3
(A 110, 152)
11 Time code (A 90)
12 Clip number / Total number of clips
13 Movie format (A 55)
14 Bit rate and resolution (A 55)
15 Frame rate
4
(A 55)
16 Embedded custom picture file
3
(A 135)
17 Output displays (A 165)
18 User bit
3
(A 93)
19 4-channel audio
3
(A 100)
20 Audio output channels (A 166)
21 Audio level meter
7 Playback operation
* The playback speed (x5, x15 or x60) will also appear in the indicator.
8 Relay recording
Appears when an MXF clip begins on one CF card and continues uninterrupted on the other. 5 indicates
the first part of the recording, 6 indicates the middle part(s) and 7 indicates the last part.
Ð PLAY Playback
Ý PAUSE Playback pause
Ô/Ó Frame reverse/Frame advance
F FWD × Fast playback*
Ø F REV Fast reverse playback*
COPY
To Next Page
Loading...
Need help?
General
