81
Adjusting the Focus
English
Adjusting the Focus
The camcorder offers 3 ways to focus. When you use manual focus, you can use focus assistance functions,
such as peaking and magnification, to help you focus more accurately.
Autofocus (AF): The camcorder continuously adjusts the focus automatically. When using autofocus, you can
one of three levels of AF speed. You can also use the focus ring (with no physical stops).
Manual focus (MF): Adjust the focus manually using the focus ring, or remotely, using the Browser Remote
application.
Push AF: While using MF, Normal AF or Medium AF, you can have the camcorder switch temporarily to Instant
AF mode as long as you hold the PUSH AF button pressed down.
Autofocus (AF) Mode
The camcorder uses the TTL autofocus system and continuously adjusts the focus on the subject in the center
of the screen. The focusing range is 1 cm (0.39 in.; at full wide-angle, measured from the front of the lens barrel)
to G.
Even during autofocus mode, you can turn the focus ring to focus manually. When you stop turning the ring, the
camcorder returns to autofocus mode. This is useful in situations such as when focusing on a subject on the
other side of a window.
Set the FOCUS switch to A.
• = appears on the left of the screen.
Remote Operation Using Browser Remote
After completing the necessary preparations (A 182), you can change
the focus mode remotely from a connected device using the Browser
Remote application.
Press [MF] on the Browser Remote screen.
• The orange line in the button will turn gray and the camcorder will
change to autofocus mode.
• Press [MF] again to return the camcorder to manual focus mode.
Operating modes:
COPY
To Next Page
Loading...
Need help?
General
