Preparing the Camcorder
36
Attaching the Shoulder Strap
Pass the ends through the strap mounts and adjust
the length of the strap.
IMPORTANT
• Be careful not to drop the camcorder when attaching
or adjusting the shoulder strap.
Removing and Attaching the Terminal Covers
You can remove the plastic terminal covers of all the camcorder's terminals to access them more readily.
Removing the Terminal Covers
1 Open the terminal cover and pull it out.
2 Grasp the strip connecting the terminal cover to the camcorder
and pull.
• This step is not necessary for the covers for the REMOTE
terminal and USB terminal, which you only need to pull straight
out.
Attaching the Terminal Covers
Insert the connecting strip into the opening to attach the terminal cover.
NOTES
• If the connecting strip is difficult to grasp, use a pair of tweezers or similar tool.
COPY
To Next Page
Loading...
Need help?
General
