167
Audio Output
English
* Only available during the recording/playback of MXF clips with 4 audio channels.
Synchronizing the Video with the Audio being Monitored
When audio is output from the AV OUT terminal or × (headphone)
terminal, you can choose to synchronize the audio signal with the video
signal or have the camcorder output the audio in real time.
1 Open the [Monitor Delay] submenu.
[¡ Audio Setup] > [Audio Output] > [Monitor Delay]
2 Select the desired option and then press SET.
Options
[Line Out]:Synchronizes the audio and video signals.
[Normal]:Allows you to monitor the audio in real time. There will be a slight delay between the audio and video.
NOTES
• The audio and video signals recorded will be synchronized, regardless of the [Monitor Delay] setting.
Selecting the Output Level of the AV OUT Terminal
You can select the output level of audio that is output from the AV OUT
terminal.
1 Open the audio ouput [Level] submenu.
[¡ Audio Setup] > [Audio Output] > [Level]
2 Select the desired level and then press SET.
Options
[1 Vrms]:The audio output level is normal.
[2 Vrms]:The audio output level is 6 dB higher.
NOTES
• This setting does not affect audio output to headphones.
[CH3+4/CH3+4]* CH3+CH4 mixed CH3+CH4 mixed
[CH1+3/CH2+4]* CH1+CH3 mixed CH2+CH4 mixed
Operating modes:
Operating modes:
Setting
Audio output
L R
[¡ Audio Setup]
[Audio Output]
[Monitor Delay]
[Normal]
[¡ Audio Setup]
[Audio Output]
[Level]
[1 Vrms]
COPY
To Next Page
Loading...
Need help?
General
