179
Connecting to a Wired (Ethernet) Network
English
Connecting to a Wired (Ethernet) Network
Connect the camcorder to a router or other device connected to a wired (Ethernet) network using a
commercially available LAN cable. Use Category 5e, shielded twisted pair (STP) LAN cables compatible with
Gigabit Ethernet (1000BASE-T) with good shielding capability.
1 Connect a commercially available LAN cable to the LAN terminal on the camcorder and a LAN port
on a network device.
2 Open the [Set Up New] submenu.
[w Other Functions] > [Network Settings] > [Connection Settings]
> [Set Up New]
3 Select [Ethernet] and then press SET.
• Continue with the procedure to configure the IP address assignment
(A 178).
LAN access indicator
LAN cable
(commercially available)
LAN port on a
network device
[w Other Functions]
[Network Settings]
[Connection Settings]
[Set Up New]
COPY
To Next Page
Loading...
Need help?
General
