Casio 3554 User Manual

●
To start measurement
1. Press (C).
This starts activity measurement.
●
This displays a screen of the
measurement being performed for the
activity you specified with CASIO
WATCHES phone app.
l
Configuring Activity Measurement
Display Settings
Note
●
For activities that require GPS signal
reception, you can determine if GPS
measurement is possible by checking
the
icon.
Not Flashing: GPS measurement is
possible
Flashing: GPS measurement is not
possible (Watch is searching for GPS
signals.)
●
If appears on the display after [GPS
READY] is displayed, it means the
GPS signal has been lost, and the
watch is searching for it.
●
If
is flashing or if is displayed
while activity measurement is in
progress, tracking of the activity will not
be recorded.
●
If you enter the function settings before
starting an activity measurement
operation, GPS measurement pauses
temporarily. The watch starts
searching for GPS signals again when
you exit the settings.
When using GPS for run timing, wait
until [GPS READY] appears on the
display before you start.
●
To pause or end a measurement
operation
1. While an activity measurement operation
is in progress, press (C).
This pauses activity measurement and
opens the pause menu screen.
Pause menuPause
2. Use (A) and (D) to choose what to do with
the activity data that was being measured.
[RESUME] Resumes timing.
[SAVE]
Saves the data and ends the
measurement.
[DISCARD]
Ends the measurement
without saving the data.
3. Press (C).
●
Choosing to save the data causes the
activity measurement result screen to
appear.
You can use (A) and (D) to scroll
between summary screens.
The display returns to the screen for the
selected activity after a short while or
when you press (E).
●
Choosing to delete the data causes the
screen for the selected activity to
appear.
●
To measure lap times
1. This starts activity measurement.
l
To start measurement
2. Press (E).
Each press of (E) displays the elapsed
time of the current section (lap time) to
appear.
Split time
Lap time
Number of Laps
3. Press (C) to pause activity measurement.
l
To pause or end a measurement
operation
Note
●
In the case of POOL SWIMMING, lap
measurement cannot be performed
using the above operation.
Before Using Pool Swimming
(POOL SWIMMING)
You need to configure the settings before
using the POOL SWIMMING activity.
●
Specify the length of the pool to be used
l
Setting the Swimming Pool Length
ー
The pool length you specify is used to
calculate the distance swum each time
you perform a turn, which is interpreted
as a lap.
ー
After you stop swimming, a lap will be
obtained after about six seconds.
●
Specify the arm where you wear the watch
This is necessary to detect the number of
strokes and other data.
l
Creating Your Profile
Watch Operation Guide 3554
22

Casio 3554 Specifications

General

Brand	Casio
Model	3554
Category	Watch
Language	English