●
To view lifelog related data with the
watch
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [LIFE LOG].
3. Press (C).
This displays the Life Log data summary
screen.
4. Use (A) and (D) to select the screen you
want to view.
①
⑤
④
②
③
A
D
DA
DA
③
⑥
DA
③
⑦
③
⑧
To d a y
Weekly
Monthly
6 months
A Step count target achievement
B Current day’s burned calories
C Today’s step count
D Target value
E Current day’s active time
F Daily step count target achievement
rate
G Weekly step count target
achievement rate
H Monthly step count target
achievement rate
5. Press (E) twice to return to the current time
screen.
Note
●
If you do not perform any operation for
two or three minutes while the Life Log
screen is displayed, the watch
automatically returns to the current
time screen.
Active Time
Your watch analyzes the measurement values
of the acceleration sensor to determine
whether you are walking, running, biking or
performing another activity, or standing still.
Your active time is the total time you spend
walking, running, biking, or doing other
activities during the day.
When you are not measuring your heart rate,
calorie consumption is also calculated based
on behavior analysis.
Compass Reading
You can use the compass function to
determine the direction of north, and to check
your bearing to a destination.
Important!
●
Check the information at the link below
to find out how to ensure correct
readings.
l
Calibrating Compass Readings
l
Digital Compass Reading
Precautions
Taking a Compass Reading
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [COMPASS].
3. Press (C).
This displays [ ] in the bearing display
area.
4. Move your arm in a figure eight.
This normally causes [ ] to disappear
and starts compass measurement.
●
If [ ] does not disappear, perform
bearing calibration.
l
Calibrating Compass Readings
Watch Operation Guide 3554
40
To Next Page
Loading...
Need help?
General
