Casio 3554 User Manual

7. Use (A) and (D) to move the pointer to
[ALARM].
8. Press (C).
9. Use (A) and (D) to move the pointer to the
alarm you want to turn off.
10. Press (C).
11. Use (A) and (D) to select [OFF].
12. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the alarm selection screen re-
appears.
13. Hold down (E) for at least one second to
return to the current time screen.
●
Turning off all alarms causes [ALM]
(alarm) to disappear from the display.
Note
●
If [ALM] (alarm) is still displayed after
you turn off an alarm, it means at least
one of the other alarms is still turned
on. To turn off all alarms, repeat steps
8 through 11 until the [ALM] (alarm)
indicator is no longer displayed.
●
If [ALM] (alarm) is still displayed even
after you turn off all the alarms, it
means the smart alarm is turned on.
Turn off the smart alarm.
l
Turning Off Smart Alarm
Stopwatch
The stopwatch can be used to perform 1-
second unit elapsed time measurement up to
99 hours, 59 minutes, 59 seconds.
It can also measure split times.
Measuring Elapsed Time
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [STOPWATCH].
3. Press (C).
This displays the stopwatch screen.
4. Use the operations below to measure
elapsed time.
C
C
C
C
Stop
Resume
Stop
Start
Hour, minute, second
5. Press (E) to reset the stopwatch to all
zeros.
Measuring a Split Time
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [STOPWATCH].
3. Press (C).
This displays the stopwatch screen.
4. Use the operations below to measure
elapsed time.
C
E
C
Stop
Split
Start
Hour, minute, second
5. Press (E) to reset the stopwatch to all
zeros.
Watch Operation Guide 3554
62

Casio 3554 Specifications

General

Brand	Casio
Model	3554
Category	Watch
Language	English