Casio 3554 User Manual

●
To enable training alert with the watch
1. Display the current time screen.
l
Watch Mode
2. Press (C).
This enters the Activity Mode.
Example:
3. Use (A) and (D) to select an activity.
4. Press (C).
●
For activities that can be measured
without receiving GPS signals, this
operation returns to the measurement
operation ready screen. In this case,
advance to step 6.
●
If you selected an activity that receives
GPS signals for measurement, this
operation displays the GPS signal
reception start screen.
5. If you selected an activity that receives
GPS signals for measurement, press (A)
or (D).
This displays the measurement operation
ready screen.
6. Hold down (A) for at least two seconds.
This displays the activity measurement
setting screen.
Pointer
7. Use (A) and (D) to move the pointer to
[TRAINING ALERT].
8. Press (C).
9. Use (A) and (D) to move the pointer to
[ON].
●
If you want to disable training alerts,
move the pointer to [OFF].
10. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the activity measurement setting
screen re-appears.
11. Press (E) to exit the setting screen.
Important!
●
Use the CASIO WATCHES phone app
to specify an alert target value for each
item. You cannot use watch operations
to configure alert target value settings.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Training Alert Screen
Indicators
A training alert screen appears on the watch
when a specified target value is reached
during activity measurement.
Indicator: Meaning:
Calories burned target
value reached.
Elapsed time target
value reached.
Travel distance target
value reached.
Cumulative altitude
target value reached.
Note
●
Alerts that can be configured depend
on the activity.
Watch Operation Guide 3554
72

Casio 3554 Specifications

General

Brand	Casio
Model	3554
Category	Watch
Language	English