Specifying the Barometric
Pressure Unit
You can specify either hectopascals (hPa) or
inches of mercury (inHg) as the display unit for
barometric pressure values.
Important!
●
When Tokyo (TOKYO) is the Home
City, the barometric pressure unit is
fixed as hectopascals (hPa) and
cannot be changed.
1. Display the current time screen.
l
Watch Mode
2. Hold down (A) for at least two seconds.
This enters the Control Mode.
3. Use (A) and (D) to select [SETTING].
4. Press (C).
This displays the setting menu screen.
5. Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6. Press (C).
This displays the GENERAL SETTINGS
screen.
7. Use (A) and (D) to move the pointer to
[UNITS].
8. Press (C).
9. Use (A) and (D) to move the pointer to
[BAROMETER].
10. Press (C).
11. Use (A) and (D) to select a barometric
pressure unit.
[hPa] Hectopascals
[inHg] Inches of mercury
12. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the unit setting screen re-
appears.
13. Hold down (E) for at least one second to
return to the current time screen.
Note
●
If you do not perform any operation for
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
●
You can also use the CASIO
WATCHES phone app to change the
barometric pressure unit.
Specifying the Temperature
Unit
You can select either Celsius (°C) or
Fahrenheit (°F) as the temperature display
unit.
Important!
●
When Tokyo (TOKYO) is the Home
City, the temperature unit is fixed as
Celsius (°C) and cannot be changed.
1. Display the current time screen.
l
Watch Mode
2. Hold down (A) for at least two seconds.
This enters the Control Mode.
3. Use (A) and (D) to select [SETTING].
4. Press (C).
This displays the setting menu screen.
5. Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6. Press (C).
This displays the GENERAL SETTINGS
screen.
Watch Operation Guide 3554
87
To Next Page
Loading...
Need help?
General
