1. While seated, place your arm on a table or
some other flat surface.
2. Keep your elbow and wrist as unbent and
straight as possible.
3. Make sure the band is not contact with the
surface below your arm and not pressed
against your wrist.
4. Display the current time screen.
l
Watch Mode
5. Use (A) and (D) to select [BLOOD
OXYGEN].
6. Press (C).
This displays the blood oxygen level
measurement screen.
7. Press (C).
Start blood oxygen level measurement.
The measurement result is displayed after
a blood oxygen level measurement
operation is complete.
8. Hold down (E) for at least one second to
return to the current time screen.
Note
●
The message [ERROR] appears on
the display if a blood oxygen level
measurement error occurs.
●
The message [- - -%] appears on the
display if the measured value is
outside the allowable measurement
range.
●
The watch automatically returns to the
current time screen if you do not
perform any operation for about one
hour while using the blood oxygen
level measurement function.
Viewing Life Log Data
Life Log lets you view the information below.
●
Step count target value and daily target
achievement rate
●
Step count
Viewing Life Log Data
●
To view lifelog related data with the
CASIO WATCHES phone app
You can use the CASIO WATCHES phone
app to view data measured by the watch.
Check the connection
●
Make sure the
e
symbol is shown on the
watch display when you perform the
procedure below. If
e
is not displayed,
refer to the information at the link below.
l
Connecting with a Phone Paired
With the Watch
1.
Y
Tap the “CASIO WATCHES” icon.
2.
Y
Tap the “My Page” tab.
3.
Y
Tap the “LIFE LOG” widget.
Open the LIFE LOG page and check the
details.
Note
●
You can also use the CASIO
WATCHES phone app to specify a
daily step target.
l
Specifying a Daily Step Count
Target
Watch Operation Guide 3554
39
To Next Page
Loading...
Need help?
General
