Timer
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
●
The watch does not perform a vibration alert
while the battery level indicator shows
. The watch does not perform a beep
alert while the battery level indicator is
“CHG” or lower.
●
You can enable the beep and vibration
alerts as required.
l
Configuring Sound and Vibration
Settings
Setting a Start Time
The start time can be set in 1-second units up
to 60 minutes.
●
To configure timer settings with the
CASIO WATCHES phone app
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the timer start time.
l
Configuring Watch Settings
●
To configure timer settings with the
watch
EZ Settings
Use this procedure to change the timer start
time setting in 30-second increments.
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [TIMER].
3. Press (C).
This displays the TIMER screen.
4. Press (A) or (D).
This returns to the EZ setting screen.
5. Use (A) and (D) to change the timer start
time setting.
●
Each press of (A) changes the setting
by -30 seconds, while (D) changes it by
+30 seconds.
6. Press (C).
This starts the timer operation.
Minute and Seconds Setting
You can use the steps below to change the
timer start time setting in one-second
increments up to 60 minutes.
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [TIMER].
3. Press (C).
This displays the TIMER screen.
4. Hold down (A) for at least two seconds.
This causes a cursor to appear under the
minutes setting.
5. Use (A) and (D) to change the minutes
setting.
6. Press (C).
This moves the cursor to the seconds
setting.
7. Use (A) and (D) to change the seconds
setting.
●
To return to the minute setting, press
(E).
8.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the TIMER screen re-appears.
Watch Operation Guide 3554
63