Cisco 2509 - Router - EN User Manual

4-31
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 4 Setting Up and Managing Network Configuration
Network Device Group Configuration
Renaming a Network Device Group
To rename an NDG, follow these steps:
Step 1 In the navigation bar, click Network Configuration.
Result: The Network Configuration page opens.
Step 2 In the Network Device Groups table, click the NDG that you want to rename.
Tip If the Network Device Groups table does not appear, click Interface
Configuration, click Advanced Options, and then select the Network Device
Groups check box.
Step 3 At the bottom of the page, click Rename.
Result: The Rename Network Device Group page appears.
Step 4 In the Network Device Group Name box, type the new name (up to 24 characters).
Step 5 Click Submit.
Result: The name of the NDG is changed.
Deleting a Network Device Group
To delete an NDG, follow these steps:
Step 1 In the navigation bar, click Network Configuration.
Result: The Network Configuration page opens.
Step 2 In the Network Device Groups table, click the NDG that you want to delete.
Tip If the Network Device Groups table does not appear, click Interface
Configuration, click Advanced Options, and then select the Network
Device Groups check box.

Cisco 2509 - Router - EN Specifications

General

Brand	Cisco
Model	2509 - Router - EN
Category	Software
Language	English