Chapter 5 Setting Up and Managing Shared Profile Components
Command Authorization Sets
5-20
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Step 5 If additional boxes appear below the Name and Description boxes, you can do any
or all of the following:
• To change the set Name or Description, edit the words in the corresponding
box.
• To remove a command from the set, from the Matched Commands list, select
the command, and then click Remove Command.
• To edit arguments of a command, from the command list box, select the
command and then type changes to the arguments in the box to the right of
the command list box.
Step 6 When you finish editing the set, click Submit.
Deleting a Command Authorization Set
To delete a command authorization set, follow these steps:
Step 1 In the navigation bar, click Shared Profile Components.
Result: The Shared Profile Components page lists the command authorization set
types available.
Step 2 Click a command authorization set type, as applicable.
Result: The selected Command Authorization Sets table appears.
Step 3 From the Name column, click the name of the command set you want to delete.
Result: Information for the selected set appears on the applicable Command
Authorization Set page.
Step 4 Click Delete.
Result: A dialog box warns you that you are about to delete a command
authorization set.
Step 5 To confirm that you want to delete that command authorization set, click OK.
Result: Cisco Secure ACS displays the applicable Command Authorization Sets
table. The command authorization set is no longer listed.
To Next Page
Loading...
Need help?
General