Chapter 5 Setting Up and Managing Shared Profile Components
Network Access Restrictions
5-6
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
To delete a PIX ACL, follow these steps:
Step 1 In the navigation bar, click Shared Profile Components.
Result: The Shared Profile Components page appears.
Step 2 Click Downloadable PIX ACLs.
Step 3 Click the name of the downloadable PIX ACL you want to edit.
Result: The Downloadable PIX ACLs page appears with information displayed
for the selected PIX ACL.
Step 4 At the bottom of the page, click Delete.
Result: A dialog box warns you that you are about to delete a PIX ACL.
Step 5 To confirm that you intend to delete the PIX ACL, click OK.
Result: The selected PIX ACL is deleted.
Network Access Restrictions
This section describes network access restrictions (NARs) and provides detailed
instructions for configuring and managing shared NARs.
About Network Access Restrictions
NARs enable you to define additional authorization and authentication conditions
that must be met before a user can access the network. Cisco Secure ACS applies
these conditions using information from attributes sent by your AAA clients.
Although there are several ways you can set up NARs, they all are based on
matching attribute information sent by a AAA client. Therefore, you must
understand the format and content of the attributes your AAA clients send if you
want to employ effective NARs.
To Next Page
Loading...
Need help?
General