11-51
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 11 Working with User Databases
ODBC Database
Step 8 Close the ODBC window and Windows Control Panel.
Result: The system DSN to be used by Cisco Secure ACS for communication with
the relational database is created on your Cisco Secure ACS server.
Configuring an ODBC External User Database
Creating an ODBC database configuration provides Cisco Secure ACS
information that enables it to pass authentication requests to an ODBC-compliant
relational database. This information reflects the way you have implemented your
relational database and does not dictate how your relational database is configured
or functions. For information about your relational database, refer to your
relational documentation.
Note Before performing this procedure, you should have completed the steps in
Preparing to Authenticate Users with an ODBC-Compliant Relational Database,
page 11-42.
To configure Cisco Secure ACS for ODBC authentication, follow these steps:
Step 1 In the navigation bar, click External User Databases.
Step 2 Click Database Configuration.
Result: Cisco Secure ACS lists all possible external user database types.
Step 3 Click External ODBC Database.
Step 4 If you are creating a configuration, follow these steps:
a. Click Create New Configuration.
b. Type a name for the new configuration for ODBC authentication in the box
provided, or accept the default name in the box.
c. Click Submit.
Result: Cisco Secure ACS lists the new configuration in the External User
Database Configuration table.
Step 5 Click Configure.
To Next Page
Loading...
Need help?
General