4-33
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 4 Setting Up and Managing Network Configuration
Proxy Distribution Table Configuration
The entries you define and place in the Proxy Distribution Table can be considered
turnstiles for each authentication request that Cisco Secure ACS receives from the
AAA client. The authentication request is defined in the Proxy Distribution Table
according to where it is to be forwarded. If a match to an entry in the Proxy
Distribution Table that contains proxy information is found, Cisco Secure ACS
forwards the request to the appropriate AAA server.
The Character String column in the Proxy Distribution Table always contains an
entry of “(Default)”. The “(Default)” entry matches authentication requests
received by the local Cisco Secure ACS that do not match any other defined
character strings. While you cannot change the character string definition for the
“(Default)” entry, you can change the distribution of authentication requests
matching the “(Default)” entry. At installation, the AAA server associated with
the “(Default)” entry is the local Cisco Secure ACS. It can sometimes be easier to
define strings that match authentication requests to be processed locally rather
than defining strings that match authentication requests to be processed remotely.
In such a case, associating the “(Default)” entry with a remote AAA server
permits you to configure your Proxy Distribution Table with the more easily
written entries.
Adding a New Proxy Distribution Table Entry
To create a Proxy Distribution Table entry, follow these steps:
Step 1 In the navigation bar, click Network Configuration.
Result: The Network Configuration page opens.
Step 2 Under the Proxy Distribution Table, click Add Entry.
Note If the Proxy Distribution Table does not appear, click Interface
Configuration, click Advanced Options, and then select the
Distributed System Settings check box.
Step 3 In the Character String box, type the string of characters, including the delimiter
to forward on when users dial in to be authenticated. For example, .uk.
Note Angle brackets (< and >) cannot be used.
To Next Page
Loading...
Need help?
General