Chapter 8 Establishing Cisco Secure ACS System Configuration
Cisco Secure ACS Certificate Setup
8-80
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Step 10 Click Submit.
Result: Cisco Secure ACS displays a CSR in the display area, on the right, under
a banner that reads:
“Now your certificate signing request is ready. You
can copy and paste it into any certification authority enrollment
tool.”
Tip You can copy and paste this certificate to the online enrollment tool of any CA.
Updating or Replacing a Cisco Secure ACS Certificate
Use this procedure to update or replace an existing Cisco Secure ACS certificate
that is out-of-date or out-of-order.
Warning
This procedure eliminates your existing Cisco Secure ACS certificate.
To install a new ACS certificate, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click ACS Certificate Setup.
Result: Cisco Secure ACS displays the Installed Certificate Information table on
the ACS Certificate Setup page.
Note If your Cisco Secure ACS has not already been enrolled with a certificate,
you do not see the Installed Certificate Information table. Rather, you see
the Install new certificate table. If this is the case, you can proceed to
Step 5.
Step 3 Click Enroll New Certificate.
Result: A confirmation dialog box appears.
Step 4 To confirm that you intend to enroll a new certificate, click OK.
Result: The existing Cisco Secure ACS certificate is removed.
To Next Page
Loading...
Need help?
General