8-57
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 8 Establishing Cisco Secure ACS System Configuration
Cisco Secure ACS Active Service Management
–
Custom actions—You can define other actions for Cisco Secure ACS to
take upon failure of the login process. Cisco Secure ACS can execute a
batch file or executable upon the failure of the login process. To make a
batch or executable file available in the on failure list, place the file in
the following directory:
drive
:\path\CSMon\Scripts
where drive is the local drive where you installed Cisco Secure ACS and
path is the path from the root of drive to the Cisco Secure ACS directory.
–
Take No Action—Leave Cisco Secure ACS operating as is.
• Generate event when an attempt is made to log in to a disabled
account—Specifies whether Cisco Secure ACS generates a log entry when a
user attempts to log in to your network using a disabled account.
• Log all events to the NT Event log—Specifies whether Cisco Secure ACS
generates a Windows event log entry for each exception event.
• Email notification of event—Specifies whether Cisco Secure ACS sends an
e-mail notification for each event.
–
To—The e-mail address that notification e-mail is sent to. For example,
joeadmin@company.com.
–
SMTP Mail Server—The simple mail transfer protocol (SMTP) server
that Cisco Secure ACS should use to send notification e-mail. You can
identify the SMTP server either by its hostname or by its IP address.
Setting Up System Monitoring
To setup Cisco Secure ACS System Monitoring, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click ACS Service Management.
Result: The ACS Active Service Management Setup page appears.
Step 3 To have Cisco Secure ACS test the login process, follow these steps:
a. Select the Test login process every X minutes check box.
b. Type in the X box the number of minutes (up to 3 characters) that should pass
between each login process test.
To Next Page
Loading...
Need help?
General