Cisco 2509 - Router - EN User Manual

7-29
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 7 Setting Up and Managing User Accounts
Advanced User Authentication Settings
Step 4 To assign the PIX command authorization set at the group level, select the As
Group option.
Step 5 To assign a particular PIX command authorization set to be effective on any
configured network device, follow these steps:
a. Select the Assign a PIX Command Authorization Set for any network
device option.
b. From the list directly below that option, select the PIX command
authorization set you want applied to this user.
Step 6 To create associations that assign a particular PIX command authorization set to
be effective on a particular NDG, for each association, follow these steps:
a. Select the Assign a PIX Command Authorization Set on a per Network
Device Group Basis option.
b. Select a Device Group and an associated Command Set.
c. Click Add Association.
Result: The associated NDG and PIX command authorization set appear in
the table.
Step 7 Do one of the following:
• If you are finished configuring the user account options, click Submit to
record the options.
• To continue to specify the user account options, perform other procedures in
this chapter, as applicable.

Cisco 2509 - Router - EN Specifications

General

Brand	Cisco
Model	2509 - Router - EN
Category	Software
Language	English