Cisco ASR 5000 Series Installation Guide

Cabling the Fast Ethernet (10/100) Line Card
FLC2 Interfaces ▀
ASR 5000 Installation Guide ▄
125
Refer to the following figure and table for pinouts for the RJ-45 Ethernet ports.
Figure 42. 10/100 Ethernet Interface Pinouts
Table 39. 10/100 Ethernet Interface Pinouts
Pin
100Base-T 100Mbps Cat5
1
TX+
2
TX-
3
RX+
4
Not applicable
5
Not applicable
6
RX-
7
Not applicable
8
Not applicable
RX = Receive Data TX = Transmit Data
Important: Be sure to label the interface cables with their destinations prior to connecting them to the FLC2.
This will assure proper reconnection should the card need to be serviced.
To cable the FLC2, simply plug an STC Ethernet cable from a network device into the desired port.

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English