Cisco Catalyst 2960-X User Manual

PurposeCommand or Action
Example:
Switch(config)# ip http timeout-policy
• idle—the maximum time period when no data is received or
response data cannot be sent. The range is 1 to 600 seconds. The
default is 180 seconds (3 minutes).
• life—the maximum time period from the time that the connection
is established. The range is 1 to 86400 seconds (24 hours). The
default is 180 seconds.
idle 120 life 240 requests 1
• requests—the maximum number of requests processed on a
persistent connection. The maximum value is 86400. The default
is 1.
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 12
Configuring the Secure HTTP Client
Beginning in privileged EXEC mode, follow these steps to configure a secure HTTP client:
Before You Begin
The standard HTTP client and secure HTTP client are always enabled. A certificate authority is required for
secure HTTP client certification. This procedure assumes that you have previously configured a CA trustpoint
on the switch. If a CA trustpoint is not configured and the remote HTTPS server requires client authentication,
connections to the secure HTTP client fail.
SUMMARY STEPS
1.
configure terminal
2.
ip http client secure-trustpoint name
3.
ip http client secure-ciphersuite {[3des-ede-cbc-sha] [rc4-128-md5] [rc4-128-sha] [des-cbc-sha]}
4.
end
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
134 OL-29048-01
Configuring Secure Socket Layer HTTP
Configuring the Secure HTTP Client

Cisco Catalyst 2960-X Specifications

General

Console port	RJ-45
USB 2.0 ports quantity	2
SFP module slots quantity	4
Installed SFP modules quantity	-
Gigabit Ethernet (copper) ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Power source	AC
Input current	5 A
AC input voltage	100 - 240 V
Power consumption (typical)	60.9 W
Number of power supply units	1
Redundant power supply (RPS) support	Yes
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4000 m
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-5 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Switching protocols	UDP, TCP, RADIUS/TACACS+
Number of VLANs	1023
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Throughput	107.1 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
Number of static routes	1000
DHCP features	DHCP server
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, SNMP, SSH
Access Control List (ACL) rules	3
Switch type	Managed
Switch layer	L2/L3
Safety	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1
Form factor	1U
Product color	Black
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet plus (PoE+) ports quantity	12
Memory type	DRAM
Noise level	39 dB
Flash memory	128 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276870 h

Weight and Dimensions

Depth	368 mm
Width	445 mm
Height	45 mm
Weight	5800 g