31-37
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-09
Chapter 31 Configuring IP Unicast Routing
Configuring OSPF
Monitoring OSPF
You can display specific statistics such as the contents of IP routing tables, caches, and databases.
Table 31-8 lists some of the privileged EXEC commands for displaying statistics. For more show ip ospf
database privileged EXEC command options and for explanations of fields in the resulting display, refer
to the Cisco IOS IP and IP Routing Command Reference for Release 12.1.
Table 31-8 Show IP OSPF Statistics Commands
Command Purpose
show ip ospf [process-id] Display general information about OSPF routing
processes.
show ip ospf [process-id] database [router] [link-state-id]
show ip ospf [process-id] database [router] [self-originate]
show ip ospf [process-id] database [router] [adv-router [ip-address]]
show ip ospf [process-id] database [network] [link-state-id]
show ip ospf [process-id] database [summary] [link-state-id]
show ip ospf [process-id] database [asbr-summary] [link-state-id]
show ip ospf [process-id] database [external] [link-state-id]
show ip ospf [process-id area-id] database [database-summary]
Display lists of information related to the OSPF
database.
show ip ospf border-routes Display the internal OSPF routing ABR and ASBR
table entries.
show ip ospf interface [interface-name] Display OSPF-related interface information.
show ip ospf neighbor [interface-name] [neighbor-id] detail Display OSPF interface neighbor information.
show ip ospf virtual-links Display OSPF-related virtual links information.
To Next Page
Loading...
Need help?
General
