Cisco Catalyst 6807-XL User Manual

• Four channels—Each module slot has four channels connected to each supervisor-engine slot (A total
of eight).
•
The following clock frequencies:
◦
3.13 GHz: For up to 20 Gbps (per channel)
◦
6.25 GHz: For up to 40 Gbps (per channel)
◦
7.50 GHz: For up to 55 Gbps (per channel)
◦
15.0 GHz: For up to 110 Gbps (per channel)
With Supervisor Engine 2T, the switch supports 220G per slot. The chassis is capable of supporting up
to 880G per slot.
Note
Clock and VTT Module
The switch supports one replaceable clock card with built-in redundancy. The supported model number is
CLK-7600.
Three replaceable voltage termination (VTT-E) modules, which are rear-serviceable (located behind back-plate)
provide reference voltage for bus signals. The supported model number is WS-C6K-VTT-E.
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
12 OL-30656-01
Product Overview
Clock and VTT Module

Cisco Catalyst 6807-XL Specifications

General

Brand	Cisco
Model	Catalyst 6807-XL
Category	Switch
Language	English