Cisco Catalyst 6807-XL User Manual

APPENDIX A
Technical Specifications
•
Physical Specifications, page 61
•
Environmental Specifications, page 62
Physical Specifications
The following are the physical characteristics of the chassis:
Table 13: Physical Characteristics of the Cisco Catalyst 6807-XL Switch Chassis
DetailsPhysical Characteristic
17.5 x 17.36 x 18.10 inches (44.45 x 44.09 x 45.97 cm).
•
Chassis depth, including the cable guide is 23 inches (58.42 cm).
•
Chassis requires 10 RU
7
.
•
You can install the chassis in:
◦
2-post or 4-post 19-inch standard equipment racks that meet
ANSI/EIA 310-D, IEC 60297, and ETS 300-119 standards.
These are available in the accessory kit.
◦
2-post 23-inch equipment racks, where you install the chassis
using center-mount brackets (to be ordered separately).
Dimensions (H x W x D)
Chassis only: 65 lb (29.48 kg).
Chassis fully configured with 2 supervisor engines, 5 switching modules,
and 4 power supplies: 195 lb (88.45 kg)
Weight
7
The chassis height is sometimes measured in rack units (RU or just U), where 1 RU or 1 U equals 1.75 in (44.45 mm).
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
OL-30656-01 61

Cisco Catalyst 6807-XL Specifications

General

Brand	Cisco
Model	Catalyst 6807-XL
Category	Switch
Language	English