Cisco Catalyst 6807-XL User Manual

The fans might still be turning when you remove the fan assembly from the chassis. Keep fingers,
screwdrivers, and other objects away from the openings in the fan assembly’s housing. Statement
263
Warning
Removing and Installing the Power Supply Converter
This section describes how to remove and install PSCs.
Related Topics
Power Supply Converter, on page 7
Power Supply Converter LEDs, on page 10
Installing the Power Supply Converter
To install the PSC, perform these steps:
Before You Begin
•
Ensure that the system (earth) ground connection has been made. For ground connection instructions,
see Establishing System Ground, on page 41
•
You may require a flat-blade or Number 2 Phillips-head screwdriver to tighten the screw on the PSC.
Procedure
Step 1
Remove the PSC from its packaging.
Step 2
Slide the PSC into the PSC bay. Ensure that the power supply is fully seated in the bay.
Step 3
Insert the mounting screw and tighten it to fully seat the connectors.
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
OL-30656-01 57
Removing and Replacing FRUs
Removing and Installing the Power Supply Converter

Cisco Catalyst 6807-XL Specifications

General

Brand	Cisco
Model	Catalyst 6807-XL
Category	Switch
Language	English