Related Topics
Removing and Installing the Fan Tray, on page 54
Troubleshooting the Fan Tray, on page 105
Fan Tray LED, on page 8
Selecting Rack Enclosure Cabinets
Cisco Systems has identified the following rack-enclosures that are determined to be Cisco-compatible:
Panduit Corporation
The following Panduit Corporation racks and thermal duct are recognized as compatible with the Cisco Catalyst
6807-XL switch:
• 4-Post Racks —Part numbers R4P23, R4P, and R4P36.
• Thermal Duct (fits on the above racks)—Part number R4PAE4.
Contact Panduit Corporation for further information on these racks and thermal duct systems. Their corporate
website is http://www.panduit.com. Their Customer Service and Technical Support phone number is 800
777-3300.
Chatsworth Products, Inc.
The N-Series TeraFrame Network Gen 3 cabinet product line is compatible with the Cisco Catalyst 6807-XL
switch. Several product configurations are available to support your specific datacenter airflow strategy:
• For hot and cold aisle configurations including aisle containment—Part number NF1U-113C-C42-1 (or
alternate sizes).
• For a vertical exhaust-ducted configuration—Part number NF1U-114C-C62-1 (or alternate sizes).
Contact Chatsworth Products, Inc. for further information on this rack enclosure. Visit
http://www.chatsworth.com/n-series for complete product information or visit http://www.chatsworth.com
for general information. Their Customer Service and Technical Support phone number is 800 834-4969
(Monday to Friday, 5 a.m. to 5 p.m., (0500 to 1700) Pacific Time).
Related Topics
Rack-Mounting Guidelines, on page 24
Chassis Fan Tray
The chassis fan assembly provides cooling air for the supervisor engine and the switching modules. The fan
tray supports side-to-side (right-to-left) airflow. If necessary, you can use airflow baffles or specialized data
center racks to redirect the airflow exhaust to the rear. The following table describes the switch-supported fan
tray models and air flow architecture and requirements.
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
16 OL-30656-01
Preparing for Installation
Air Flow
To Next Page
Loading...
Need help?
General